Solution S i-Fix
- Größte Auswahl an CYBEX Produkten
- 30 Tage kostenlose Rückgabe
- Sichere Zahlungsmethoden Ihrer Wahl
- Beratung von CYBEX Experten
Wie für dein Kind gemacht: Der Solution S i-Fix wächst mit deinem Kind von 3 bis 12 Jahre mit und passt sich den veränderten Bedürfnissen an, genau wie es Eltern tun. Dieser wandlungsfähige Kindersitz ist nun nach dem neusten UN R129/03 Sicherheitsstandard zertifiziert, welcher unter anderem strengere Seitenaufpralltests beinhaltet.
- Patentierte neigungsverstellbare Kopfstütze
- Integrierter linearer Seitenaufprallschutz
- Optimiertes Belüftungssystem
- 12-fache höhenverstellbare Kopfstütze
Passt sich optimal den Bedürfnissen deines Kindes an
Die patentierte, neigungsverstellbare Kopfstütze hilft das Nach-vorne-Kippen des Kopfes im Schlaf zu verhindern. So bleibt der Kopf des Kindes jederzeit in der Sicherheitszone, was bei einem Seitenaufprall besonders wichtig ist. Zusammen mit dem L.S.P. System bietet dies erhöhte Sicherheit für das Kind. Die 12-fach höhenverstellbare Kopfstütze kann an den persönlichen Platzbedarf des Kindes angepasst werden. Die ausgeklügelte Einhandbedienung ermöglicht den Eltern unterwegs eine schnelle und einfache Verstellung.
- UN R129/03
- Height: 100 – 150 cm
- Alter: Ab ca. 3 bis 12 Jahre
- Hilft das Nach-vorne-Kippen des Kopfes im Schlaf zu verhindern Patentierte, neigungsverstellbare Kopfstütze
- Reduziert die Energie im Falle eines Seitenaufpralls
- Für optimales Mitwachsen
- Unterstützt ein angenehmes Klima
- Für extra Stabilität und Sicherheit
- Sorgt über Jahre hinweg für komfortable Autofahrten
- Passt sich optimal an
- Sicherheit für Ihr Kind
- Stoffbezüge maschinenwaschbar bei 30°
Installation mit Fahrzeuggurt: Der Sitz kann auf allen Fahrzeugplätzen mit Dreipunkt-Automatikgurt verwendet werden.
- 405 mm
- 500 mm
- 610 - 810 mm
- 6,2 kg
Was ist im Paket?
- Solution S i-Fix Kindersitz
Überprüfen Sie, ob Ihr Auto kompatibel ist
FAQ - Solution S i-Fix
No. Car seat models without an ISOFIX System cannot be retrofitted. Please do not adapt or tamper with car seats to make them fit, as the authorities do not allow any technical changes to them.
Yes, the side airbag can remain activated when using the car seat.
The Linear Side-impact Protection (L.S.P.) reduces the forces of a side-impact collision and thus also the risk of injury. Generally, we advise parents to install the L.S.P. on both sides of the car seat. If, however, there is insufficient space to install the L.S.P. nearest the middle of the vehicle, it is not absolutely essential. If the car seat is installed on the front passenger seat, or if a passenger is sitting beside the car seat in the rear of the vehicle, ensure that the L.S.P. element facing the inside of the car is folded away. For safety reasons, please ensure that the L.S.P. nearest the door is always installed.
Only a headrest adjusted to the optimum height will give your child the best possible protection and comfort. The height can be adjusted in various positions. The headrest must be adjusted so no more than 2-3 cm fit between the child’s shoulders and the bottom of the headrest.
It is not permissible to use the car seat on lateral facing vehicle seats.
Yes. You can use this car seat on rear-facing vehicle benches as long as the vehicle bench is approved for use by adults and has a 3-point vehicle belt. The headrest of the vehicle bench should not be removed when the car seat is mounted.
Thick clothing prevents the harness from lying snugly against the body. This incorrect belt positioning could result in the harness slipping off the shoulder. For this reason, your child should wear everyday clothing. Thick clothing such as winter jackets should be avoided where possible. Once your child has been positioned in the seat, he/she can be covered with an extra blanket for warmth.
No, this car seat is not approved for use on an airplane.
When compared to booster seats, high-back booster seats considerably reduce the risk of injury. Booster seats do not provide proper protection from side-impacts. A high-back booster seat is equipped with side protection which protects the child from injury in the case of a side-impact collision. Moreover, the high-back booster seats include a shoulder belt routing which can be adjusted to the height of the child, further improving their travelling safety.
Yes, the backrest is flexible. Therefore the backrest can adapt perfectly to any vehicle seat. In the event of an accident, the backrest moves slightly forward with your child, and is therefore able to secure the whole body early on.
We at CYBEX strongly recommend that you replace a seat after any kind of accident. This is because tiny hairline cracks, which may not be visible to the naked eye, can appear in the plastic parts of a seat after an accident. These cracks can pose an increased risk to safety.
Please refer to the retailer where you bought your CYBEX seat. They will deal with the matter on your behalf.
Before purchasing the car seat it is important to check if it is approved to be used in your vehicle. We advise going to www.cybex-online.com and checking the ‘More info’ section on the product page to find out whether the car seat is compatible with your vehicle. The compatibility can also be checked with typelist that can be found attached to your car seat. Please do not use any part of this car seat on its own or in combination with boosters, backrests or headrests from other manufacturers or from different CYBEX product series. The car seat can be used only on vehicle seats which are equipped with an automatic 3-point vehicle belt. For the proper protection of your child, it is essential to use and install the car seat according to the instructions given in the user guide. The user guide can be found attached to the car seat, or it can be downloaded on www.cybex-online.com.
The patented reclining headrest is a passive safety feature from CYBEX. When the child is awake, the recline angle of the headrest can be set to the upright position. When the child is asleep, the angle of the headrest can be set to the reclined position which prevents the child’s head from tipping forward into a vulnerable position while sleeping.
We generally recommend using the car seat on one of the back seats of the vehicle. Statistically, installing the car seat on the passenger seat poses a higher risk of injury for your child. However, in exceptional cases the car seat may be used on the passenger seat as well. Please note the following: if the car is equipped with an airbag, put the passenger seat as far back as possible. Please ensure that the upper belt point of the 3-point vehicle belt always stays behind the belt routing of the car seat, so that the belt runs backwards not forwards.
Sometimes the ISOFIX Connectors may be difficult to release from the anchorage points. Please increase the distance between the car seat and the vehicle seat by moving the ISOFIX adjustment lever under the booster seat and pulling the car seat away from the vehicle seat. In doing so, you will release any tension from the ISOFIX system which may be preventing deinstallation.
No, even without using the ISOFIX System. The car seat cannot slide underneath the 3-point vehicle belt when fixed in compliance with the instructions. The same principle applies here as to an adult wearing a retractable 3-point vehicle belt. In the event of a head-on collision, the car seat moves forward, triggering the vehicle belt´s locking mechanism which then holds the car seat securely in place.
While this CYBEX car seat is equipped with an ISOFIX System, it can also be installed in vehicles without ISOFIX anchorage points. Turn the locking arms 180° inwards and slide them into the booster. The child and the car seat can then both be secured using the 3-point vehicle belt.
You can install the cup holder easily by sliding it into one of the slots in the shell on each side of the car seat. The position of the slots is indicated by a cup holder symbol.